Presses

What is in the Press category?

The Press category includes all Forging Presses, Arbor Press, Blanking Press, Coining, (Mint Coining) Press, Cut-Off Press, Deep Throat Press, Die Cutting Press, Die Tryout & Spotting Press, Dished & Flanged End Spinning Press, Double & Triple Action Press, Drawing Press, Extrusion Press, Fin Press, Fine Blanking Press, Gap Frame (OBS) Press, H-Frame Press, High Speed Production Press, Hot Stamping Press, Hydraulic Press, O.B.I. Press, Straight Side Press, Straightening Press, Transfer Press.

Press Machinery currently available

Filtering

(Showing 14 of 14 items)
Search
Country
  • Image not available
    Image not available
     site
    Flexicore process for AJ2 SINGLE PHASE AND THREE PHASES
    Flexicore process for AJ2 SINGLE PHASE AND THREE PHASESStation of screwing, Vernishing, gaz oven, descrewing and geometrics control SERIMATEC FLEXICORE, Control Test Surge SCHLEICH, loading, lathe for small repairs on the stators. Site:Appr...
  •  site
    Baileigh HSP-75A 75 Ton Air/Hand H-Frame Shop Press
    Max. Capacity 75 Ton. Hydraulic System pressure 8691 psi. Moveabe Cylinder. Working width 31.5". Cylinder Stroke 9.8". Cylinder ⌀9". Working range 2.6"~ 34.8". Weight 365kgs. Dimensions 84" x 44" x 24".
  •  site
  •  site
    2018 Zani Motion Master 300 Model MM 300-D2-32-26 Vertical Press With Siemens Simatic HMI Touch Control & Asservimenti Servo Feeder/Decoiler & Straightener
    Capacity 300 Ton. Bed Dimension 3,200 x 1,200mm. Ram Dimension 3,150 x 1150mm. Stroke 130-260mm. Shut Height 500-700mm. Feed Height 350mm. Strokes 25-80spm. Maximum Feeder Width 600mm. Ram Adjustment 200mm. Stop Time 0.2s. Table Ram Height ...
  •  site
    Chin Fong Press Line
    Consisting Of (2) Chin Fong OCP-110N Vertical Presses, (4) OCP-80N Vertical Presses, (2) Orii LCC 05HK Straightener/Feeders, (6) Orii RY-120S2SS Robot Transfer Units, Orii Turnover Transfer Unit, SMI 2 Shop Floor Connect Production Monitori...
  •  site
  •  site
    2022 Cannon TCS 150T Press
    Maximum Clamping Force = 1500KN. Opening Force 700KN. Maximum Platen daylight 2,000mm. Moving platen stroke 1,800mm. Minimum mould height 200mm. Sliding Table stroke 2,165mm. Table Dimension 2,000mm x 1,500mm ('X'=2 'Y'=6 'T' Slots 18mmx'XY...
  •  site
    Bliss 75 Tonne Press (Spares Or Repair)
    Max Force 75Tonne. Bed Size W914mm x D610mm. 150mm Stroke. With Base Cushion and Guarding. Please note Induction Oven Not included.
  •  site
    Chin Fong OCP-80N 'C' Frame Single Crank Vertical Press
    Capacity 80 Ton. Slide Area 770 x 420mm. Bolster Area 1,000 x 550mm. Stroke 180mm. Die Height 315mm. Strokes 35-80spm. Slide Adjustment 80mm. Rating Point Up From Bottom Of Stroke 4mm. S/No. 93049 (1993).
  •  site
    250 Ton Rhodes 250/HDS-CNC Hydraulic Double-Sided Press with Beijer Electronics X2 Base Control (1991)
    Pressure 250 Tonnes. Max. Stroke Variable 30mm - 500mm. Slide Speeds - Approach 240mm/Sec. Pressing 22mm/Sec. Return 230mm/Sec. 2 Die Cushions - Force 35T/Cushion - Stroke 200mm Max. Powair Model RF125-300 Roll feed: Max. Width 300m. Max. T...
  •  site
    Chin Fong OCP-80N 'C' Frame Single Crank Vertical Press
    Capacity 80 Ton. Slide Area 770 x 420mm. Bolster Area 1,000 x 550mm. Stroke 180mm. Die Height 315mm. Strokes 35-80spm. Slide Adjustment 80mm. Rating Point Up From Bottom Of Stroke 4mm. S/No. 93052 (1993).
  •  site
    Chin Fong OCP-110N 'C' Frame Single Crank Vertical Press
    Capacity 110 Ton. Slide Area 910 x 470mm. Bolster Area 1,150 x 600mm. Stroke 180mm. Die Height 350mm. Strokes 30-60spm. Slide Adjustment 80mm. Rating Point Up From Bottom Of Stroke 6mm. S/No. 92578 (1993).
  •  site
    Chin Fong OCP-110N 'C' Frame Single Crank Vertical Press
    Capacity 110 Ton. Slide Area 910 x 470mm. Bolster Area 1,150 x 600mm. Stroke 180mm. Die Height 350mm. Strokes 30-60spm. Slide Adjustment 80mm. Rating Point Up From Bottom Of Stroke 6mm. S/No. 92578 (1993).
  •  site
    SGS 10 Tonne Model SHBP10M Workshop Press
    Capacity 10 tonnes. Hand Pump with Gauge. Height Range 180 - 335mm. Stroke 180mm. Ram Diameter 25mm. Machine Footprint W500mm x D300mm x H800mm. Weight 52Kg.

Manufacturers

Manufacturers that are normally found in this category are Aida, Atlantic, Bentley Bliss, Blow, Bruderer, Bystronic, Chin Fong, Cincinnati, Clearing, Dake, Danly, Denison, Eitel, Erie, Federal, Fielding, Hannifin, Hare, Hugh Smith, Komatsu, Lake Erie Lauffer, LVD, Macrodyne, Minster, Muller, Neff, Niagara, Pacific, Phoenix, Reiss, Rhodes, Schuler, Seyi, Stanko, Verson, Warco, Yangli.

Press Equipment Auctions

How Can I Pay For My Items?

Paying for your items couldn’t be easier. We accept bank transfers for any sale, but unfortunately, we do not accept credit cards or cheques. All payment information can be found on your invoice.

HOW TO PAY ONCE AN ITEM HAS BEEN WON

Once the auction or item has closed, if you have been successful, you will be notified by email. Payment for items won is due immediately. Invoices are available online in the 'My Invoices and Payments' section.

Payment methods we accept for UK sales are:

  • Bank Transfer
  • Debit Card Payment

For USA & EU sales we require invoices to be paid by wire transfer.

PLEASE NOTE WE DO NOT ACCEPT CREDIT CARDS OR CHEQUES

*Cleared funds must be received prior to goods being released

PAYMENT OF SALES TAX

Sales tax is payable at the prevailing rate on all goods purchased. For sales made out of the UK, VAT is charged on both the hammer price and buyers premium. If goods are subsequently removed or exported out of the UK, VAT can be refunded on the hammer price providing sufficient proof of export is supplied to Apex. This only applies to goods that have left the UK within three months of the auction date.

I’ve Paid My Invoices; How Do I Collect My Items?

Our staff are on-site to supervise and control removals only, they are not permitted to move equipment or assist with the removal in any way. Apex Auctions thanks you for your cooperation in helping to keep yourself and others safe while on-site and for aiding us in the timely removal of goods from the site.

If you are planning to use a Courier Service or Pallet Line to collect your goods/lots - Please forward our Full Terms & Conditions to them. They must be able to: Prepare / Disconnect / Handle / Remove / Box / Palletize / Lift / Load your items from the auction site - Your Cooperation with this will save you time & cost.

Access will only be granted to buyers and their contractors/agents once the account has been settled in full by way of cleared funds.

Access may be declined if the collection is not booked in with the Site Manager. You'll find their details on your invoice.

Full information can be found in the sale information section of the sale.

Can I Change My Contact Details?

Sure, head to "Your Account" and select "My Settings". Here it's possible to change or update your personal information and preferences. You won't be able to update your email address. To do this, you'll need to email info@apexauctions.co.uk from your new email address and request to update it; please include your username and previously linked email address so that we can locate your account.