Gill Engineering

Vertical Machining Centres, CNC Lathes and Equipment Available due to Restructuring.

Ended: 26th April 2012 14:00
  • site
    LOT 1
    Daewoo (2001 - Delivered 2002) Model ACE-V400 Twin Pallet Vertical Machining Centre. With Fanuc 18i-M Control. Low Spindle Hours
    Swivelling Machining Table: 2 x Clamping Surfaces 650mm x 450mm each. Spindle Speeds to 10,000RPM. Spindle Nose 40BT. With 30 Station ATC. S/No AV3S1159
    Sale has ended
  • site
    LOT 2
    Daewoo (2001 - Delivered 2002) Model ACE-V400 Twin Pallet Vertical Machining Centre. With Fanuc 18i-M Control. Low Spindle Hours
    Swivelling Machining Table: 2 x Clamping Surfaces 650mm x 450mm each. Spindle Speeds to 10,000RPM. Spindle Nose 40BT. With 30 Station ATC. S/No AV3S1166
    Sale has ended
  • site
    LOT 3
    Semco (2003) Model 530 CNC/Manual Straight Bed Centre Lathe. With Anilam 4200T Control.
    Max Dia Swing 530mm x 1520mm B.C. Max Dia Swing Over Cross Slide 300mm. Speeds 90 - 1600 RPM. Spindle Bore 80mm. S/No 210117
    Sale has ended
  • site
    LOT 4
    Kitamura (1989) Mycentre 2 Vertical Machining Centre. With Fanuc 0MB Control
    Table 900mm x 410mm. Traverses X = 585mm. Y = 430mm. Z = 460mm. ATC Capacity 20 Tools. Spindle Nose 40BT. Speeds 7000 RPM. S/No 10882
    Sale has ended
  • site
    LOT 5
    Hitachi Seiki Model Hitec-Turn 20 SII CNC - 2 Axis Turning Centre / CNC Lathe. With Seicos L Multi Control.
    Max Swing Over Bed 380mm. Max Turning Dia 210mm. Traverses X = 200mm Z = 400mm. Turret - 10 Stations. S/No NR24468
    Sale has ended
  • site
    LOT 6
    LNS Super Hydrobar HS CNC Bar Feed
    Overall Length Approx 5M. Bar Capacity 52mm
    Sale has ended
  • site
    LOT 7
    Bridgeport Series 1 - 2 HP Vari-Speed Turret Milling Machine. With 2 Axis DRO
    Table 1066mm x 228mm with Power Table Long Traverse. Spindle Nose R8. S/No 365400981W
    Sale has ended
  • site
    LOT 8
    Jones & Shipman Model S8413-002 CNC 4th Axis Unit with Sanders Electronics Controller
    Fitted With 250mm Dia Face Plate
    Sale has ended
  • site
    LOT 9
    Bristol Erikson Pnuematic Indexing Attachment
    Flange Dia Approx 178mm. Centre Height 165mm
    Sale has ended
  • site
    LOT 10
    Hydrovane 43 Air Centre Packaged Air Compressor
    Working Pressure 7 bar. Main Motor 7.5kW. S/No 7HV460110
    Sale has ended
  • site
    LOT 11
    Clarke Air Model SE14A15 Single Cylinder Air Compressor with Air Receiver
    Single Phase - 240 Volts. S/No 0046758
    Sale has ended
  • site
    LOT 12
    Four Jaw Chuck - Diameter Approx 628mm - Bore 180mm
    With 4 Jaws
    Sale has ended
  • site
    LOT 13
    Three Jaw Chuck - Diameter Approx 498mm - Bore 190mm
    With Quantity of Various Jaws - Hard & Soft
    Sale has ended
  • site
    LOT 14
    Coolie Pedestrian Battery Driven Fork Lift Truck
    SWL 750kg. Untested. S/No 7488-1
    Sale has ended
  • site
    LOT 15
    Wooden - Metal Framed 6 Drawer Plan / Drawing Storage Unit
    Approx Dimensions 1524mm x 914mm x 787mm High
    Sale has ended